1/24 scale adjustable brass slot car chassis. Ready for mounting your model body. Complete with H&R Lightning motor II (blue can), 33 tooth Parma King Crown Gear, new harder compound tires, and body mounting kit.

$45.99

(plus shipping and handling)

H&R Slider Chassis  HRCH04  $45.99

Stainless steel 4 Inch wheel base 1/24 scale racing chassis kit includes 1 pair of 1/8 axle and 1 pair of 3/32 axle adjustable bushings.

$21.99 each

(plus shipping and handling)

Parma Flexi 5 Chassis  PAR-605  $21.99

Laser cut from spring steel and feature an integral guide tongue, laser cut leadwire guides and front wheel mounts and additional bracing behind the front pin tubes. Front underside of chassis are chamfered.

$45.00

(plus shipping and handling)

Stingray Super Speedway  PS-320  $45.00

Laser cut from spring steel and feature an integral guide tongue, laser cut leadwire guides and front wheel mounts and additional bracing behind the front pin tubes. Front underside of chassis are chamfered.

$45.00

(plus shipping and handling)

Perimeter Box Stock PS-317-06 $45.00

Ready to Run 1/24 scale Parma Edge chassis only with sealed Super 16D motor. Ready to mount your Lexan or 1/24 scale model body. Great competitive chassis. Also available in kit form, unassembled, without motor or as 1 piece bare chassis only. 

(plus shipping and handling)

Parma Edge chassis RTR  PAR452   $49.99

Parma Edge chassis KIT  PAR452K  $34.99

Parma Edge chassis ONLY PAR582  $18.59

1/24 scale kit of stamped steel and piano wire, designed for adjustable wheelbase from 1-3/4 up to 11 inches long. Uses square bushings for maximum adjustability for high performance.

$19.49 Kit As Shown

(plus shipping and handling)

Parma Hole Shot  PAR-597  $19.49

Laser cut from stainless steel, fully adjustable to fit any 1/24 scale model body. Requires stainless steel tubing or music wire for solder together assembly.
 

23.00 Kit As Shown

(plus shipping and handling)

JPR Drag Chassis Kit  JRP-2008  $23.00

Laser cut from stainless steel, to fit any 1/24 or 1/25 scale drag chassis.

Front wheel axle bracket (left)

Wheelie bar bracket (right)

2.00 each(
plus shipping and handling)

JPR Front Wheel Axle JRP-FA2008  $2.00

JPR Wheelie Bar Bkt  JRP-WB2008  $2.00

Drag car builder's setup kits for use with stainless steel tubing, available separately.

Inline/small tires kit (shown).
Inline/large tires kit.

$9.99 each
(plus shipping and handling)

WRP Inline/small tire    WRP-C10  $9.99

WRP Inline/large tire    WRP-C06  $9.99

Drag car builder's setup kits for use with stainless steel tubing, available separately.

Sidewinder/small tires kit. (shown)
Sidewinder/large tires kit.

$9.99
(plus shipping and handling)

WRP Sidewinder/small tire WRP-C07  $9.99

WRP Sidewinder/large tire WRP-C08  $9.99

Brass motor bracket for small diameter tires and 1/4 inch OD bushings. Used with stainless tubing or hard wire in building chassis.

$3.49
(plus shipping and handling)

REH Motor Bracket  REH3000  $3.49

Brass motor bracket for small diameter 1-1/16 (.990) tires and 3/16 inch OD bushings. Used with stainless tubing or hard wire in building chassis.

$5.49
(plus shipping and handling)

WRP Motor Bracket  WRP-RW-02  $5.49

Brass motor bracket for large diameter1-1/16 to 1-3/16 tires and 3/16 inch OD bushings. Used with stainless tubing or hard wire in building drag chassis.

$5.49
(plus shipping and handling)

WRP Motor Bracket  WRP-RW-03  $5.49

Brass guide tongue used with stainless tubing or hard wire in building drag chassis.

$3.99
(plus shipping and handling)

WRP Guide Tongue  WRP-RW-01  $3.99

JDS light weight stainless steel tubing used in building chassis sold by the single 12 inch piece.

K&S Music wire is sold in 3-12 inch pieces. (3 Feet total)

$2.00 each
(plus shipping and handling)

12" S.S. Tubing .042  JDS-2019  $2.00

12" S.S. Tubing .050 JDS-2017  $2.00

12" S.S. Tubing .065  JDS-2016  $2.00

12" S.S. Tubing .072  JDS-2015  $2.00

12" S.S. Tubing .082  JDS-2014  $2.00

3x12" Music Wire .032  KS-501  $2.00

3x12" Music Wire .047  KS-502  $2.00

3x12" Music Wire .055  KS-503  $2.00

3x12" Music Wire .062  KS-504  $2.00

3x12" Music Wire .078  KS-505  $2.00

Drag Racing Specialty's assembled wheelie bar wheels with O-ring tires, ready to install.
 

$5.60 each
(plus shipping and handling)

DRS Wheelie Bar  DRS-138  $5.60

Square bushing technology fits Parma chassis with square axle openings.

Available as off-set "Adjusta Bushings" for 1/8 and 3/32 axles
or center drilled 1/8 axle.

$1.70 pair
(plus shipping and handling)

Adjusta Bushing  1/8 axle  PAR626  $1.70

Adjusta Bushing 3/32 axle  PAR627  $1.70

Centered Bushing 1/8 axle  PAR628  $1.70

Parma round oilite bushings are a porous brass material that retains oil and keeps you racing.
Available for 3/32 axles with 3/16 or 1/4 Outside Diameter.
Or 1/8 axle with 1/4 Outside Diameter.

$1.70 pair
(plus shipping and handling)

Oilites 3/32 axle, 3/16 OD PAR624 $1.70

Oilites 3/32 axle, 1/4 OD PAR625 $1.70

Oilites 1/8 axle, 1/4 OD PAR623 $1.70

Bronze round bushings require regular oiling with quality synthetic oils. Competition bushings for fast racing.
Available for 3/32 axles with 3/16 or 1/4 Outside Diameter.
Or 1/8 axle with 1/4 Outside Diameter.

$2.98 pair
(plus shipping and handling)

Bronze 3/32 axle, 3/16 OD  S7-220  $2.98

Bronze 3/32 axle, 1/4 OD  S7-229  $2.98

Bronze 1/8 axle, 1/4 OD  S7-221  $2.98

One pair of flanged ball bearings. Available for 1/8 inch axle, 1/4 inch OD or 3/32 axle, 3/16 inch OD. Excellent upgrade for unlimited class drag and round track racers.

Priced per pair
(plus shipping and handling)

1/8 Inch Axle Ball Bearings AB089 $7.99

3/32 Inch Axle Ball Bearings BB090 $8.99

Hardened tool steel drill blank axles. Available in 1/8dia x2-5/8 or 3/32dia x2-1/4 inches long.

Priced each
(plus shipping and handling)

1/8 Inch Hardened Axle PAR-639 $2.25

3/32 Inch Hardened Axle PAR-633 $2.00

Stainless steel spacers eliminate axle side play and reduce friction.
Available for 3/32 or 1/8 inch axles.

3/32 X .024 thick (left)
3/32X .005 thin (not shown)
1/8 X .020 thick (right)

$2.98 10 pack per size
(plus shipping and handling)

Slick 7-10pk. 3 /32X.024 thick  S7-22

Slick 7-10pk. 3/32X.005 thin  S7-21

Slick 7-10pk. 1/8X.020 thick  S7-22

Aluminum axle spacers for 3/32 axles are .100 inch long to eliminate large stacks of thin spacers. Specialty designed for Slick 7's 1.110 wide rear end chassis.

$2.98 per 6 pack.
(plus shipping and handling)

Slick 7 Long 3/32 Axle Spacer  S7-284AL

Replacement guide flag for Parma FCR Class cars and an excellent choice for flexi class and drag racing too!

Includes nut.

$1.35 each
(plus shipping and handling)

The Blade Guide Flag  Par-645

Quality guide flag for drag and round track racing.

$1.25 each
(plus shipping and handling)

Black Guide Flag  EC-125

2x3 inch lead sheet with super adhesive back for tuning and weighting chassis.
Contains lead: Exposure to lead is known to cause birth defects, other reproductive harm & cancer.

$3.98 each
(plus shipping and handling)

Slick 7 Slick Lead  S7-08

Twelve 1/4oz (7gr) sections used to add weight chassis for improved performance.
Contains lead: Exposure to lead is known to cause birth defects, other reproductive harm & cancer.

$2.00 each
(plus shipping and handling)

Adhesive Weights   PC025L

Light weight vacuum formed styrene hood scoops and cowls add that custom hot rod look to your model body drag car. Easily trimmed and sanded to fit any hood.

$3.00 each
(plus shipping and handling)

Teardrop Pro-stock Scoop (top left)

Round Pro-stock Scoop (top right)

Cowl Induction Hood Scoop (bottom right)

Parma 1/24 scale 4.5 inch replacement body available pained and trimmed or clear and trimmed.

Paint colors vary, call or email for availability.

Painted Body $8.69 each
Clear Body $7.49 each
(plus shipping and handling)

1/24 scale Corvette-Callaway Lemans .010 Lexan body that you trim to fit  4 inch stamped steel chassis.

Color schemes vary, call or email for availability.

$8.00 each